- Manuals
- Brands
- Producer's PRIDE Manuals
- Farm Equipment
- 1339494
- Assembly instruction manual
Canopy coop
Hide thumbs Also See for 1339494:
- Assembly instruction manual (11 pages)
-
- Contents
- Table of Contents
- Bookmarks
Table of Contents
-
Safety Instructions
-
Parts List
-
Two Shoulder Frame Assembly
-
Assembly Diagram
-
Left Side Shoulder
-
Side Roof Assembly
-
Left Side Roof
-
Right Side Roof
-
Middle Peak Frame Assembly
-
Middle Peak Frame
-
Combine the Whole Roof Frame
-
Adding Right Side Legs
-
Adding Lift Side Legs
-
-
Door Panel Assembly
-
Mesh Panels Assembly
-
-
-
Roof Cover Assembly
-
Tight the Roof Cover
Advertisem*nt
Quick Links
- 1 Parts List
- Download this manual
ASSEMBLY INSTRUCTION - RUN
CANOPY COOP
SKU# 1339494
Tools required for assembly (not included)
Distributed by:
TRACTOR SUPPLY COMPANY
5401 VIRGINIA WAY
BRENTWOOD, TN 37027
For customer support, call: 1-888-376-9601
www.TractorSupply.com
MADE IN CHINA
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for Producer's PRIDE 1339494
-
Farm Equipment Producer's PRIDE CANOPY COOP Assembly Instruction Manual
(11 pages)
-
Farm Equipment Producer's PRIDE Hill Country Coop Care Instructions
(14 pages)
-
Farm Equipment Producer's PRIDE 1179768 Manual
Prairie coop (115 in. l x 55.9 in. h x 53.1 in. w) (18 pages)
-
Farm Equipment Producer's PRIDE PRAIRIE COOP Care Instructions
(15 pages)
-
Farm Equipment Producer's PRIDE 1237322 Manual
Garden chicken coo (15 pages)
-
Farm Equipment Producer's PRIDE Ranch Chicken Coop Care Instructions
(16 pages)
-
Farm Equipment Producer's PRIDE 1299682 Instruction Manual
Chicken coop heater & brooder (2 pages)
-
Farm Equipment Producer's PRIDE PP CHATEAU CHICKEN COOP Assembly Manual
(20 pages)
Summary of Contents for Producer's PRIDE 1339494
- Page 1 ASSEMBLY INSTRUCTION - RUN CANOPY COOP SKU# 1339494 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 5401 VIRGINIA WAY BRENTWOOD, TN 37027 For customer support, call: 1-888-376-9601 www.TractorSupply.com MADE IN CHINA...
- Page 2 SAFETY INSTRUCTIONS ● This instant shelter is a temporary structure and is not recommended as a permanent building. ● Choose your shelter location carefully. Check for overhead utility lines, branches, etc. DO NOT install near roofs or other structures that may shed snow, ice or excessive run-off onto your shelter.
- Page 3 PARTS LIST Drawing Qty. Description Part Corner Upright Pole A Center Upright Pole Corner Upright Pole B Top Upright Pole Door Panel Cover Sleeve Tube Cover Sleeve Tube With Male End Panel Ⅰ Panel Ⅱ Roof Cover Front Fabric Panel Back Fabric Panel With Window M6X50 Bolts M6X40 Bolts...
- Page 4 ASSEMBLY Notes: 1. Place all parts in a clear area and arrange them on the ground in front of you. 2. Remove all packaging materials and place them back in the box. Do not dispose of the packaging materials until assembly is complete. 3.
- Page 5 ASSEMBLY STEP 2: Side roof assembly. Assembly diagram: This side up Assemble the parts #4, #5, #6, #7 together as shown above. You will get two Side Roof structure as below, one for left side, one for right side. Note: The male end of #5, #6, #7 should face upright. Left Side Roof Right Side Roof...
- Page 6 ASSEMBLY STEP 3: Middle peak frame assembly. Assembly diagram: Assemble the parts #4, #8, #9 together as shown above to get below structure. Middle Peak Frame STEP 4: Combine the whole roof frame. Middle Peak Frame Right Side Roof Left Side Roof Left Side Shoulder Right Side Shoulder Connect the Frame Structures finished from step1, step2, step3 together as shown above to...
- Page 7 ASSEMBLY STEP 5: Adding right side legs. Need 2 people to lift the right side of the roof, the 3rd people insert legs #10, #11, #12 to the right side of the roof. Note: The position of the parts #10, #12 should be as shown above. Make sure its spring button direction match the holes direction on parts1 &...
- Page 8 ASSEMBLY STEP 7: Built the front & back pole support. Connect #11, #13 together, and fix them with bolts and nuts as shown above. STEP 8: Door panel assembly. Fix the door panel part #14 to patr #11 with bolts and nuts. Note: When face the door panel, part #12 should be on the left side and part #10 should be on the right side.
- Page 9 ASSEMBLY STEP 9: Mesh panels assembly. Fix the other panels from the right side of the door panel between each two poles, fasten them with bolts and nuts. Suggest to assemble the panels in turn. Notes: 1. Make sure the smaller size mesh is in the lower part the panel to better prevent the predators. 2.
- Page 10 ASSEMBLY STEP 11: Tighten the front & back fabric panels. Insert the tube 15# into the bottom sleeve of the panels as shown in below Fig.1. Then tie the puller strap 30# over the tube 15# shown in Fig.2, pull tight as shown in Fig.3. Note: When installing the back door tarp, connect 15# and 16# first, and then insert it into the sleeve sewn on bottom of the fabric.
- Page 11 ASSEMBLY STEP 13: Tight the roof cover. Connect 1pc 15# tube with 2pcs #16 tube, and then insert it into the bottom sleeve of the roof tarp. Meanwhile, tie the web strap 31# over the tube and then fix the Ratchet Tie Down 29# onto it as shown in below drawings and pull tight.
